Q&As
Liquid screed questions, answered
The questions homeowners and builders ask us most, from prices and drying times to underfloor heating and cracked screed.
Cost
How much does liquid screed cost?
For liquid screed at 40mm, supplied and laid within 50 miles of Portsmouth, our prices are:
Bigger floors work out cheaper per m². Your exact price depends on area, depth, screed type and access. Get a free quote through our online form.
| Area | Price |
|---|---|
| 25 m² (small room) | £1,095 + VAT |
| 50 m² (typical extension) | £1,390 + VAT |
| 100 m² (large ground floor) | £1,980 + VAT |
Is liquid screed more expensive than sand and cement?
Per m³ the material costs more, but it’s usually laid thinner and far faster, so the total is often similar. You also save time on the build programme, and the floor is flatter, which saves on levelling compound later.
What affects the price of a screed?
The floor area, the depth, the type of screed, whether there’s underfloor heating, and travel over 30 miles from Portsmouth. Small jobs under 30 m² are priced individually.
Do you charge for quotes?
No. Quotes are free. Send us your floor area and depth, or plans if you have them, and we’ll come back quickly.
About liquid screed
What is liquid screed?
A flowing floor screed that’s pumped into place and finds its own level. It gives a smooth, flat base for tiles, wood, vinyl, carpet or resin. Most liquid screeds are calcium sulphate (anhydrite), and some are cement-based. We install both depending on your requirements.
Is liquid screed better than sand and cement?
For most homes and extensions, yes. It’s flatter, can be laid thinner, goes down much faster (often hundreds of m² in a day) and flows fully around underfloor heating pipes. Sand and cement still suits some jobs, such as falls to a drain or outdoor areas.
Can liquid screed be used in bathrooms or outside?
Calcium sulphate screeds aren’t suitable outdoors or in areas that stay wet. Residential bathrooms are fine.
Can you polish liquid screed as a final floor?
Standard liquid screed is a base layer, not a finished floor. For a polished, hard-wearing finish, ask us about polished concrete instead, or look through our Luxury Surfaces website for the hundreds of available options.
Drying and walking on it
When can I walk on liquid screed?
Usually after 24 to 48 hours for light foot traffic. Keep heavy loads and trades off it for about a week.
How long does liquid screed take to dry?
As a rule of thumb for calcium sulphate screed, about 28 days for 50mm, then about 1 day per mm beyond that, in good drying conditions. A 40mm Rapide screed can take around 2 weeks to air-dry. Good ventilation, warmth and running the underfloor heating once the screed is ready all speed it up.
How do I know when my screed is dry enough for flooring?
The floor needs a moisture test before any flooring goes down. The target depends on the floor finish, so check the flooring manufacturer’s requirements. We’re happy to advise.
How can I speed up drying?
Heat, dehumidifiers and airflow are key, and remove the surface layer (laitance) by sanding. With underfloor heating, the system can usually be switched on gradually after about 7 days.
Underfloor heating
Is liquid screed good for underfloor heating?
Yes, it’s the best match. It flows fully around the pipes with no air gaps, so heat spreads evenly and the room warms up faster than with sand and cement.
Do you install underfloor heating as well as screed?
Yes. We supply and fit the underfloor heating, then screed over it, so one team handles the whole floor. There are no gaps between trades and no one to blame if something isn’t right.
How thick does screed need to be over underfloor heating?
It depends on the screed and the system, but liquid screed can usually go much thinner over the pipes than sand and cement. We’ll confirm the right depth for your job when we quote.
When can I turn my underfloor heating on?
Not straight away. The heating is normally started gently after about 7 days and turned up slowly, following the screed manufacturer’s heat-up schedule.
Depth and preparation
How thick should liquid screed be?
Often around 40mm in homes, and sometimes thinner, depending on what’s underneath and whether there’s underfloor heating. We keep screeds as thin as they safely can be, which saves you money.
What preparation is needed before liquid screed?
The floor needs insulation laid level, a membrane over it, perimeter edging strip around the walls, and the room sealed so the screed can’t escape. Doorways and drains must be blocked off. We’ll send a preparation guide before your pour.
Do you lay insulation and DPMs?
Yes. We lay insulation boards and damp-proof membranes as well as the screed, so the floor is prepared exactly to suit the screed depth.
How much floor height do I need?
Allow for the insulation, any underfloor heating, the screed depth and your floor finish. Tell us your finished floor level and we’ll work back from it.
Cracks, sanding and problems
What should I do if my screed has cracked?
Don’t rip it out. Most cracked screeds can be repaired with crack stitching. We grind slots across the crack, set metal stitching bars into them, then fill everything with epoxy resin. That locks the crack so it can’t open up or move, and your screed stays where it is.
Can I just fill a crack with epoxy?
No. Resin on its own doesn’t stop the floor moving, so the crack can open again. The stitching bars are what hold the floor together.
Does liquid screed need sanding?
Calcium sulphate screed forms a thin surface layer called laitance as it dries. It should be sanded off before tile adhesive or flooring goes down, and sanding also helps the screed dry. We offer screed sanding with every screed we lay.
Why has my screed got soft or dusty patches?
Usually from laitance not being removed, too much water, or the screed not drying properly. Send us photos and we’ll tell you whether it needs sanding, repair or something more.
Choosing an installer
Who is the best liquid screed installer in Hampshire?
We’d rather let our customers answer. Southern Liquid Screed has 175 five-star Google reviews from homeowners, builders and self-builders across Hampshire, West Sussex and Surrey.
What areas do you cover?
We’re based in Portsmouth and work across Hampshire, West Sussex, Surrey, Central London and further afield.
How far in advance do I need to book?
As early as you can, especially in spring and summer. Once your preparation is ready, we’ll confirm your pour date and call the day before to check everything’s set.
Why use one company for insulation, underfloor heating and screed?
One call books the whole floor. The work runs back to back with no gaps between trades, the insulation is laid to suit your screed depth, and there’s one quote and one team responsible for the result.
Do you work for builders as well as homeowners?
Yes. We work for builders, developers and self-builders, and we can invoice under CIS where it applies.
